Ancillary Products

 

Contact Us for more information.

Hardware Products

fastnerpic
Fasteners

To compliment our services , we stock and supply a range of fasteners and fixings for attaching other materials and products to steel  .
For more information click here

brick_tie_small
Brick Tie

 

Used to secure bricks to frame work. Clips onto stud flange with a light tap with a trowel. Available in galvanised and stainless steel.

 

plumb_grommet_small
Plumbing Grommets

 

Snaps into 32mm service holes for running plumbing pipework through the framework to separate the metals and support pipes to prevent hammering.
elec_grommet_small
Electrical Grommet

 

Snaps into 32mm punched service holes to insulate electrical wires from steel framing and to provide a rounded edge for easier wiring installation.
insul_fix_small
Insul-Fix™

 

Used to fix insulation to steel frames.
Will not tear or damage foil during installation.
adjustable_piers_tops_small
Adjustable Piers

These piers allow for height adjustment in floor systems. They will allow you to get your floor level and keep it level if any ground movement occurs.

75shoe
75mm Internal Shoe

Made to fit inside a 75mm column, used to tie down the column.

90shoe
90mm Internal Shoe

Made to fit inside a 90mm column, used to tie down the column.

fedtrim_feet_small
Fedtrim Feet

 

Ties down columns in car ports, verandahs etc.
Also hides all those ugly bolts and screws under a decorative cover.

 

dec_brace_small
Decorative Brace

 

Provides a brace to offset posts or can be purely decorative.
Available in different shapes.

Click here for more shapes

ezyjamb
EzyJamb®

 

Provides a seemless, clean look to door jambs.

Click here for more information

ezycap
EzyCap®

 

Made to finish off wall ends.

Click here for more information

ezyreveal
Ezyreveal®

 

Create seemless, clean window sills.

Click here for more information

cavity_slider_small
Cavity Sliders

 

Metal cavity sliding door frames with a timber exposed edge to suit 75 and 90mm metal studwork. Common sizes are kept in stock and most other sizes available on order.
wallstab_small
Wall Stabiliser Bracket

This bracket is used to horizontally stiffen the top of non loadbearing internal walls by connecting them to the roof system (mostly trusses), but still allow for verticle deflection (slab/floor movement and truss/roof structure flexing under load).

decorative_brackets_small
Colorspan/Boxspan Brackets
These brackets are custom made to suit individual jobs. They come in a range of sizes, shapes, angles, and pitches.
Commonly used in the connection of exposed Boxspan members in Verandahs , Pergolas and car ports. Galvanised material suitable for powder coating.

 Roofing Products

ridge_tie_small
Ridge/Hip Tie

 

The Ridge/Hip Tie is a special Custom Steel Frames structural member.
It provides two 40mm ridge battens, a lip for roof battens to be fastened to and a folded safety edge.
valley_tie_small
Valley Tie

 

This member is a Valley Support Tray to support a Lysaghts or equivalent Valley Tray (colourbond or zinc). It provides two 40mm Valley battens, a lip for roof battens to be fastened to, a folded safety edge and grooves to prevent sweating between the 2 members.
ceiling_batten_small
Ceiling Battens

 

19mm top hat batten 0.42 thick with serrated top and safety edge.Primarily used as a ceiling sheet connection under trusses. Other uses include wall cladding battens, eave battens, bottom chord tie and electrical cable tray through trusses.
roof_batten_small
Roof Battens

 

40mm top hat batten 0.55 for general use on roofs , walls , fences , floors. Features mitre cut ends , serrated non skid top and a safety edge.

 

Framing Products

flat_pack_small
Flat Packs

We can supply your frame in flat pack form.   Usefull for remote sites.

angle_trim_small
Angle Trim

 

Used as a general joiner between steel framing members.
Available 1.2mm thick in three sizes –
  1. 32mmx32mm
  2. 67mmx67mm
  3. 60mmx75mm
top_plate_small
Top Plate

 

Used as the top cord of our walls and roof trusses.
Optional 32mm service holes.
75mm or 90mm widths, in 1.0 or 1.2mm thickness.
Lengths to order.

 

stud_small
Stud

 

Rolled to fit inside our Top Plate material.
Optional 32mm service holes.
75mm or 90mm widths, in 1.0 or 1.2mm thickness.
Lengths to order.
Ends can be crimped.
nogging_small
Nogging

 

Rolled to fit inside our Stud material.
75mm width, in 1.0 or 1.2mm thickness.
Lengths to order.
lipped_stud_small
Lipped Stud

 

Rolled to fit inside our Top Plate material.
Optional 32mm service holes.
75mm or 90mm widths.
Lengths to order.

Structural Products

c_purlin_small
C Purlin (no holes)
 Galvanised
 
Widths from 100mm to 250mm.
1.2-1.9mm thickness
Suitable for floor joists, Rafters and general use when screw fixing.
Lengths to order.
gal_siderail_small
Purlin Nesting Channel (siderail)
Galvanised
 
To suit purlin sizes.
Suitable for floor bearers, carports and roof construction
true_purlin_small
C Purlin (no holes)
 TrueCore
 
Widths from 100mm to 250mm.
Suitable for floor joists, Rafters and general use when welding.
Lengths to order.

 

true_side_small
Purlin Nesting Channel (siderail)
TrueCore

 

To suit purlin sizes.
Suitable for floor bearers, carports and roof construction

 

raw_rhs_small
RHS/SHS
Uncoated
 
Available in many sizes square or rectangular.
Suitable for columns or any light structural application.
Should be appropriately painted or powdercoated.

 

boxspan_small
ColorSpan/Boxspan

 

Available in sizes from 100mm to 250mm.
Suitable for carports, pergolas and other outdoor applications.
Looks fantastic when powdercoated and assembled using our bracket system.

 

gal_rhs_small
RHS/SHS
Duragal
 
Available in many sizes square or rectangular.
Suitable for columns or any light structural application where screw connections are used.
Suitable for welding.
Pre-galvanised.